Tait Limited TMAH6C ユーザーズマニュアル

Basic operation 21

5. Speak clearly into the microphone and release the PTT 

key when you have finished talking.

Note: You cannot change channels while 
transmitting.

1. Select the required channel, and press the PTT key.

2. Once the person you have called replies, lift the micro-

phone off the microphone clip.

3. Hold the microphone about 5cm (2 inches) from your 

mouth and press the PTT key to transmit.

4. Speak clearly into the microphone and release the PTT 

key when you have finished talking.

Your radio may have a transmit timer that limits the amount 
of time you can transmit continuously. When the transmit 
timer is about to expire, the red LED flashes and the radio 
gives three beeps. You must release the PTT before you can 
transmit again.

Note: Your radio may be unable to transmit for a short 
time after the transmit timer has expired.

When there is valid activity on your radio’s currently 
selected channel or group, the radio then unmutes and you 
can hear the call.

If the incoming call contains special signalling that matches 
the signalling programmed for your radio, the green LED 
flashes and your radio may give a ringing tone.