Tait Limited TPAK5A ユーザーズマニュアル

If you are charging the battery for the first 

time, follow the instructions on page 4.

1 Ensure that the charger is connected to the correct 

Tait power adaptor.

2 Put the battery in the charger.

If you’re putting the radio in the charger as 

well, you can leave it turned on if you're expecting a 
call. The battery still receives a full charge. 

If a radio is attached, the ‘battery in charger’ 

 

symbol appears in the radio display.

 

The red ‘Charging’ LED glows to indicate that the 
battery is charging. For a battery that is almost 
completely discharged, allow 2 hours.

If the amber ‘Fault’ LED lights up, refer to 

3 When the green ‘Ready’ LED on the charger glows, 

the battery is fully charged. Remove it when you are 
ready—the charger will not overcharge the battery.

You can put the battery in the 
charger either with or without 
the radio