Fisher Price DNV31-15 ユーザーズマニュアル

• Charge the battery until the power button light 

 turns green. 

It will remain green until you remove the charger cord from 
Smart Toy.

• Once the battery is charged, remove the charger cord from the 

socket in Smart Toy. Then remove the charger cord from the 
USB brick and unplug the USB brick from the wall outlet.

• A fully charged battery should last for about 3½ hours of 

continuous play.

Green: Full Charge
White: Power ON
Red: Low Battery
Yellow: Charging

• Smart Toy’s power is completely OFF in package. To turn power 

ON, press and hold the power button for up to 10 seconds until 
it lights up. For first time use, Smart Toy will take about a minute 
to boot up.

• If Smart Toy is left idle for more than 10 minutes, Smart Toy 

enters sleep mode and the power button light turns off. Press 
the power button to turn power back ON (and the power button 
lights up).

• To turn power completely OFF, press and hold the power button 

for up to 10 seconds until the light turns off. When power is 
completely OFF, you’ll need to press and hold the power button for 
up to 10 seconds until it lights up.

• Smart Toy is ready for play right out of the package. For best 

performance, fully charge the battery very soon!

 Open the fasteners on the back of Smart Toy.

  Plug the smaller end of the charger cord into 

Smart Toy’s socket.

  Plug the other end of the charger cord into a USB brick 

(not included).

  Plug the USB brick into a standard wall outlet. A fully charged  

battery may take up to 3 hours.