Fisher Price N932609T ユーザーズマニュアル

28

Problem

Solution

Receiver beeps and displays 
low battery icon 

 on screen

Battery pack in receiver is weak or dead. Use AC adaptor as 
power source and to charge the battery for four hours.

Transmitter power L.E.D. 
does not light

Transmitter power is off. Turn transmitter power on.

Loose power cord connection and transmitter power is off. 
Check transmitter power cord plug-to-outlet connection.

No power to wall outlet and transmitter power is off. Make sure 
light switch that controls power flow to wall outlet is on.

Power is off because circuit breaker for baby’s room is off. 
Make sure house fuses and circuit breakers are on.

You can hear conversations or
sounds from other homes

There is signal interference due to other nursery monitors on 
same channel or cordless telephone use. You may need to pair 
the receiver and transmitter. Remove the receiver battery door 
and press the pairing button with a paperclip. The power LED 
will blink when the pairing button is released. Then, turn over 
the transmitter and press the pairing button with a paperclip. 
The signal L.E.D. on the receiver will flash and you will hear 
a confirmation tone.

Problems & Solutions