Atlantic Guest Inc 501 ユーザーズマニュアル
2
CAUTION!
THE MODEL 501
COMPLIES WITH PART 15 OF THE FEDERAL COMMUNICATIONS
COMMISSION RULES. CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE GUEST COMPANY MAY VOID YOUR AUTHORITY TO
APPROVED BY THE GUEST COMPANY MAY VOID YOUR AUTHORITY TO
OPERATE THE SPOTLIGHT!
The GUEST 501 BEAMER
remote control spotlight consists of:
(1)
The Spotlight / Receiver
(2)
The hand held wireless remote (R.F. Transmitter).
Item 1 is powered by 12 Volts D.C. Item 2 is powered by a 12 Volt Alkaline Battery
(provided with unit). See section titled “Installing Transmitter Battery”.
Installation
(provided with unit). See section titled “Installing Transmitter Battery”.
Installation
Range of operation of the wireless remote (R.F. Transmitter) is approximately 100 feet
under ideal conditions. The following will reduce the range:
under ideal conditions. The following will reduce the range:
(1)
A weak 12 Volt Alkaline Battery in the Transmitter.
(2)
Local radio interference.
(3)
Obstacles between the wireless remote (R.F. Transmitter) and Spotlight.
To provide control in the event of temporary signal loss or loss of your R.F. Transmitter,
we strongly suggest you replace the transmitter battery on a regular basis.
we strongly suggest you replace the transmitter battery on a regular basis.
This unit is designed for 12 volt DC operation only.
CAUTION!
TO HELP PREVENT POSSIBLE SIGNAL LOSS
,
CHANGE BATTERIES YEARLY OR MORE OFTEN
WITH EXTENDED USE
.
Mounting the Spotlight
1. Select a horizontal, smooth surface to mount the spotlight in an upright position (not
upside down). Be sure you will have access to the underside of the chosen location,
and that you will be able to drill holes there without damaging existing wiring or
and that you will be able to drill holes there without damaging existing wiring or