Westell Inc. A9080YYXX-07 ユーザーズマニュアル

 

 

 

 

 

030-300459 Rev. A 

21 

July 2005 

 User Guide 

UltraLine II (Model 800015) 

 
To access the UltraLine’s user interface from your PC, launch your web browser. Next, type http://192.168.1.1 in 
the browser’s address bar and press “Enter” on you keyboard. The following Connection screen will be displayed. 
 

 
To browse the Internet using your UltraLine II, you must first establish a WAN connection. View the Connection 
screen. If the WAN Connection field displays Down, you do not have a WAN connection. Check to see that you 
have connected your UltraLine II to the appropriate WAN device and that the WAN Connection field displays Up 
before proceeding with your Modem’s configuration. (Refer to section 6, “Installing the Hardware,” for installation 
instructions.) 
 
IMPORTANT: Ensure that your WAN Connection is Up before proceeding with the Modem’s configuration. 

 
After you have established a WAN connection, you are ready to set up your account profile. Click Edit to continue. 
 

Connection Overview 

Displays your WAN Connection status. 

Connection Name  

The Connection Name is from the connection profile that you set up.  

PPP Status 

UP = PPP session established 
DOWN = No PPP session established. 

Connect/Disconnect  

Click Connect to establish a PPP session. 
Click Disconnect to disconnect a PPP session 

Edit 

Click Edit to edit or add a connection profile. 

 
If you clicked Edit in the preceding Connection screen, the following screen will be displayed. This screen enables 
you to add new connection profiles to or to edit existing connection profiles in your account. Connection profiles can 
be associated with specific service settings, such as connection settings or NAT services, enabling you to customize 
your Modem for specific users. The Connection Name field enables you to enter the desired name that you wish to 
use for each profile that you set up. You may create and store up to eight unique connection profiles in your Modem, 
which you can use once you establish a PPP session with your ISP. 
 
Important: Before you set up a connection profile, you must obtain your Account ID, Account Password, from your 
Internet service provider. You will use information when you set up your account parameters. If you are at a screen and 
need help, refer to the Help section located at the right of the screen.