Westell Inc. A9080YYXX-07 ユーザーズマニュアル

 

 

 

 

 

030-300459 Rev. A 

25 

July 2005 

 User Guide 

UltraLine II (Model 800015) 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
If you have finished browsing the Internet and want to disconnect from your Internet service provider, click the 
Disconnect button in the Connection Overview screen. A pop-up screen will appear. Click OK to disconnect the 
PPP session. 
 
CAUTION: If you disconnect the PPP session, this means that your Modem no longer has an Internet connection 
with your ISP. Thus, the Internet connection for all PCs connected to the Modem will also be disconnected until the 
PPP session is re-established. However, your WAN connection will not be affected and it should remain Up. When 
you are ready to end your WAN connection, simply power down the Modem via the power switch on the Modem’s 
rear panel. 
 
If you disconnected your PPP session, the PPP Status field will display Down. When you are ready to establish a 
PPP session, click Connect. (If you powered down the Modem, you must first power up the Modem, and then log on 
to your account profile to establish a PPP session.) 
 

 
 
NOTE: When you are ready to exit the Modem’s interface, click the X (close) in the upper-right corner of the screen. 
Closing the screen will not affect your PPP Status or your WAN connection. When you are ready to restore the 
Modem’s interface, you must launch your Internet browser and type http://192.168.1.1/ in the browser’s address bar, 
and then press ‘Enter’ on your keyboard.