Westell Inc. A9080YYXX-07 ユーザーズマニュアル
UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A
33
July 2005
User Guide
UltraLine II (Model 800015)
13. RESTART
The following screen will be displayed if you select Restart at the main menu. If you want to erase the stored
configuration, click the check box labeled Reset device to configuration to factory defaults (a check mark will
appear in the box). Next, click the Restart button to restart the Modem.
CAUTION: To reset the Modem to factory default configuration, you must click the check box prior to clicking the
Restart button. If the box is checked, when you click Restart, all custom configuration information will be erased.
To retain the Modem’s present configuration, leave the box unchecked and click Restart button.
After you click the Restart button, the following pop-up screen will be displayed. Click OK to continue. Click
Cancel if you do not want to restart the Modem.
Cancel if you do not want to restart the Modem.
If you clicked OK in the preceding pop-up screen, the following screen will be displayed. Please wait for your
Modem to restart. After your Modem has restarted, the Edit Connection screen will be displayed.
At the Edit Connection screen, confirm that the PPP Status field displays “Up” before proceeding with your
Modem’s configuration.
NOTE: If you have chosen to reset the Modem to the factory default configuration, you must set up your account
profile and establish your connection as previously explained in section 8.2 “Setting Up Connection Profiles.”