Westell Inc. A9080YYXX-07 ユーザーズマニュアル
UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A
44
July 2005
User Guide
UltraLine II (Model 800015)
DHCP Lease Time
Factory Default = 01:00:00:00
Displays the amount of time the provided addresses will be valid, after which the
DHCP client will usually re-submit a request.
Note: DHCP Lease Time is displayed in the format (day:hour:min:sec)*. This value
must be greater than 10 seconds. Seconds must be between 0 and 59, minutes must be
between 0 and 59, and hours must be between 0 and 23.
Displays the amount of time the provided addresses will be valid, after which the
DHCP client will usually re-submit a request.
Note: DHCP Lease Time is displayed in the format (day:hour:min:sec)*. This value
must be greater than 10 seconds. Seconds must be between 0 and 59, minutes must be
between 0 and 59, and hours must be between 0 and 23.
15.7.2 DNS
The following screen will be displayed if you select LAN > DNS from the Configuration menu.
DNS
Domain Name
Note: Some ISP’s may require the
name for identification purposes.
Note: Some ISP’s may require the
name for identification purposes.
This field allows you to enter a Domain Name for the Modem.
To add a Domain Name, in the field under User Assigned DNS, type in
your new domain name and click Set.
To add a Domain Name, in the field under User Assigned DNS, type in
your new domain name and click Set.
Static Host Assignment
Host Name
This field allows you to enter a HOST name for the Modem.
To add a new Host name, in the field under Static Host Assignment, type
in the Host Name and the associated IP address and then click Add.
To delete a Host name, click the Delete button adjacent to the Host Name
and IP Address you want to delete.
To add a new Host name, in the field under Static Host Assignment, type
in the Host Name and the associated IP address and then click Add.
To delete a Host name, click the Delete button adjacent to the Host Name
and IP Address you want to delete.
IP Address
Displays the IP address that is assigned to the Host Name.
Discovered Local Devices
This field displays a list of the computers on the LAN that have been assigned a DHCP Address. The DNS name
and IP address entry of each discovered device is displayed. (Note: The values in this field will be displayed
barring any propagation delays. If ‘No Discovered Devices’ is displayed, manually refresh the screen.)
and IP address entry of each discovered device is displayed. (Note: The values in this field will be displayed
barring any propagation delays. If ‘No Discovered Devices’ is displayed, manually refresh the screen.)
15.7.3 Alternate LAN
The following screen will be displayed if you select LAN > Alternate LAN from the Configuration menu. This
screen contains the settings that control how the Modem interacts with the local devices to which it is connected.
NOTE: It is recommended that you do not change these settings unless instructed by your service provider.