Westell Inc. A9080YYXX-07 ユーザーズマニュアル
UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A
54
July 2005
User Guide
UltraLine II (Model 800015)
Interface
The physical ports available for mapping
Group
Factory Default: Private LAN
The software defined virtual LAN group to which the port should be assigned:
Possible Responses:
Private LAN – The selected port will appear as a member of the Private LAN group.
Private LAN2 – The selected port will appear as a member of the Private LAN2 group
Public LAN – The selected port will appear as a member of the Public LAN Group.
Private LAN3 – The selected port will appear as a member of the Private LAN3 group
The software defined virtual LAN group to which the port should be assigned:
Possible Responses:
Private LAN – The selected port will appear as a member of the Private LAN group.
Private LAN2 – The selected port will appear as a member of the Private LAN2 group
Public LAN – The selected port will appear as a member of the Public LAN Group.
Private LAN3 – The selected port will appear as a member of the Private LAN3 group
15.8 Spanning Tree
The following screen will be displayed if you select LAN > Spanning Tree from the Configuration menu. This
screen enables you to assign the Modem’s physical ports to software groups. To enable Spanning Tree functionality
for your Modem, click the box adjacent to Enable (a check mark will appear in the box). Next, click Save to save
your settings. Note: By factory default, Spanning Tree is disabled.
Spanning Tree
Enable
When this box is checked Spanning Tree is activated.
If the box is unchecked, Spanning Tree is deactivated.
If the box is unchecked, Spanning Tree is deactivated.