Westell Inc. A9080YYXX-07 ユーザーズマニュアル
UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A
67
July 2005
User Guide
UltraLine II (Model 800015)
If you clicked OK, in the preceding pop-up screen, the following screen will be displayed. The screen displays the list
of MAC addresses added to the MAC Address Filter Table. You may now add, edit, or delete MAC addresses from
the table by clicking on the desired MAC address (displayed in the window) and then by clicking either Add, Edit, or
Delete. Next, click OK in the pop-up screen.
of MAC addresses added to the MAC Address Filter Table. You may now add, edit, or delete MAC addresses from
the table by clicking on the desired MAC address (displayed in the window) and then by clicking either Add, Edit, or
Delete. Next, click OK in the pop-up screen.
After you have finished adding, editing or deleting MAC addresses in the MAC Filter table, click the box adjacent to
Enable MAC Address Filtering (a check mark will appear in the box). Click Save to save your settings.
NOTE: When the MAC address Filter is enabled (box is checked), only the stations that are in MAC Filter table and
that are set to Allowed will be accepted by the Modem. All other stations will be blocked.
Enable MAC Address Filtering (a check mark will appear in the box). Click Save to save your settings.
NOTE: When the MAC address Filter is enabled (box is checked), only the stations that are in MAC Filter table and
that are set to Allowed will be accepted by the Modem. All other stations will be blocked.
15.10.4 Advanced Wireless Settings
The following settings will be displayed if you select Wireless > Advanced from the Configuration menu. Enter the
appropriate values, and then click Save to save the settings.
Wireless Advanced Configuration
Beacon Period
The time interval between beacon frame transmissions. Beacons contain rate and
capability information. Beacons received by stations can be used to identify the access
points in the area.
capability information. Beacons received by stations can be used to identify the access
points in the area.
RTS Threshold
RTS/CTS handshaking will be performed for any data or management MPDU
containing a number of bytes greater than the threshold. If this value is larger than the
MSDU size (typically set by the fragmentation threshold), no handshaking will be
performed. A value of zero will enable handshaking for all MPDUs.
containing a number of bytes greater than the threshold. If this value is larger than the
MSDU size (typically set by the fragmentation threshold), no handshaking will be
performed. A value of zero will enable handshaking for all MPDUs.
Fragmented Threshold
Any MSDU or MPDU larger than this value will be fragmented into an MPDU of the
specified size.
specified size.
DTIM Interval
The number of Beacon intervals between DTIM transmissions. Multicast and broadcast
frames are delivered after every DTIM
frames are delivered after every DTIM