Westell Inc. A9081XXYY-07 ユーザーズマニュアル
030-300479 Rev. A
Draft 1 – 10/17/05
030-300479 Rev. A
18
October 2005
User Guide
UltraLine IIB (Model A90-816030)
7.3 Establishing a PPP Session
After you have set up your connection profile and clicked Save, view the PPP Status field at the Connection
Overview screen. If the PPP Status displays Down, click the Connect button to establish a PPP session.
NOTE: Whenever the PPP Status displays Down, you do not have a PPP session established. If your Gateway’s
connection setting is set to “Always On” or “On Demand,” after a brief delay, the PPP session will be established
automatically and the PPP Status will display Up. If the connection setting is set to “Manual,” you must click on the
Connect button to establish a PPP session. Once the PPP session has been established (PPP Status displays Up), you
may proceed with your Gateway’s configuration. (Refer to the preceding Edit Connection screen to change your
connection setting.) The factory default connection setting is “Always On.”
When the Connection screen displays Up in the PPP Status field, this indicates that you have established a PPP
session with your ISP. As shown in the following screen, MainPPP is the factory default connection name used to
establish a PPP session with your ISP. After you have established your PPP session, you may use other connection
profiles that you have created via the Edit button. The name of the profile will be displayed in the Connection Name
field. If needed, refer to section 7.2 for details on setting up a connection profile.
NOTE: If you experience problems establishing a PPP session, contact your ISP for further instructions.