Westell Inc. A9081XXYY-07 ユーザーズマニュアル

 

 

 

 

 

030-300479 Rev. A 

64 

October 2005 

 User Guide 

 
The following screen will be displayed if you select WAN > VCs from the Configuration screen. 
 
NOTE: The VCs cannot be modified if the VersaPort™2 port is configured as the WAN port. 
 
The Edit button enables you to change the VC configuration settings of the Gateway. Details on the edit button are 
explained later in this section. 
 
NOTE: The actual information displayed in this screen may vary, depending on the network connection established. 
 

 

 
 

Status 

Allows you to enable or disable your VC (Virtual Connection) 

VPI 

Displays the VPI (Virtual Path Indicator) value for a particular VC, which is 
defined by your Service Provider. 

VCI 

Displays the VCI (Virtual Channel Indicator) value for a particular VC, 
which is defined by your Service Provider. 

Protocol 
 
 
NOTE: The configuration 
specified by your Service 
Provider will determine which 
Protocols are available to you. 

Displays the Protocol for each VC, which is specified by your Service 
Provider. 
Possible Response: 
PPPoA = Point to Point Protocol over ATM (Asynchronous Transfer Mode) 
PPPoE = Point to Point Protocol over Ethernet 
Bridge = Bridge Protocol 
Routed IP = IP over ATM