Westell Inc. A9081XXYY-07 ユーザーズマニュアル
030-300479 Rev. A
Draft 1 – 10/17/05
030-300479 Rev. A
85
October 2005
User Guide
UltraLine IIB (Model A90-816030)
16.5 Remote Access
The following screen will be displayed if you select Remote Access from the Maintenance menu. This screen
enables you to configure Remote Access for your Gateway. Enter the appropriates values in the fields provided and
then click Save to save the settings.
enables you to configure Remote Access for your Gateway. Enter the appropriates values in the fields provided and
then click Save to save the settings.
Remote Access
User Name
The name used for Remote Access session. The only valid characters are
(a-z, A-Z, 0-9). The User Name must be at least 6 characters and must
not exceed 12 characters long.
(a-z, A-Z, 0-9). The User Name must be at least 6 characters and must
not exceed 12 characters long.
Password
The password used for Remote Access session. Do not use spaces or
double-quotes in the password. The password must be at least 6
characters and must not exceed 12 characters long.
double-quotes in the password. The password must be at least 6
characters and must not exceed 12 characters long.
Confirm Password
Enter the same values as the password.
Timeout
The interval (in minutes) after which the Remote Access session will
disconnect, if it is idle.
disconnect, if it is idle.
Enable Timeout
Factory Default = Enable
If Enabled (box is checked) this will activate the Remote Access timeout
function.
If Disabled, the Remote Access timeout function will be deactivated.
If Enabled (box is checked) this will activate the Remote Access timeout
function.
If Disabled, the Remote Access timeout function will be deactivated.
Enable Remote Access
Factory Default = Disable
If Enabled (box is checked), Remote Access will be activated.
If Disabled, Remote Access will be deactivated.
If Enabled (box is checked), Remote Access will be activated.
If Disabled, Remote Access will be deactivated.
Remote URL
Displays the URL for the Remote Access session.