Westell Inc. A908260XX ユーザーズマニュアル
UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A
53
August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
15.6.3 Public LAN—Multiple IP Address Passthrough
The following screen will be displayed if you select Configuration > LAN > Public LAN from the menu options.
This screen contains the settings that control how the Gateway interacts with the local devices to which it is connected.
NOTE:
1. Selecting Public LAN will enable your computer to have global address ability. To use the Public LAN feature,
your ISP must support Public LAN and Static IP. Contact your ISP for details.
2. Westell recommends that you do not change these settings unless your service provider instructs you to do so.
To enable Public LAN, do the following:
To enable Public LAN, do the following:
1. Click the Enable DHCP Server check box (a check mark will appear in the box). Note: By factory default
this box will already contain a check mark.
2. Enter the appropriate address values in the fields provided. (Refer to the following table for information
about the Private LAN settings.)
3. Enter the desired lease time values.
4. Click Save to save the settings.
4. Click Save to save the settings.
Alternate LAN - Public LAN Settings
Select DHCP Network
Displays the DHCP Network that you have selected.
Enable DHCP Server
Factory Default = Disable
Possible Responses:
If Enabled (box is checked), this will enable the Public LAN DHCP server and
allow IP address to be server from the DHCP Public LAN pool.
If Disabled (box is unchecked), this will disable the Public LAN DHCP server.
Possible Responses:
If Enabled (box is checked), this will enable the Public LAN DHCP server and
allow IP address to be server from the DHCP Public LAN pool.
If Disabled (box is unchecked), this will disable the Public LAN DHCP server.