Westell Inc. A90WMT-00 ユーザーズマニュアル

Draft 1 - 07/11/06

030-300417 Rev. A 

63 

July 2006 

The following settings will be displayed if you select DHCP from the Advanced LAN menu. 

DHCP Server 

This setting allows Media Gateway to automatically assign IP addresses to 
local devices connected on the LAN. Westell advises setting this to enabled for 
the private LAN. 
Off = DHCP Server is disabled 
Private LAN = DHCP addresses will be saved into the Private LAN 
configuration. 
Public LAN = DHCP addresses will be saved into the Public LAN 
configuration. This option is only available if the Public LAN DHCP server is 
enabled.  

NOTE: These addresses will be overwritten if your ISP supports dynamic 
setting of these values. 

DHCP Start Address 

Factory Default = 192.168.1.15 
This field displays the first IP address that the DHCP server will provide. The 
DHCP Start Address must be within the IP address and lower than the DHCP 
End Address. You may use any number from 0 to 254 in this address. 

DHCP End Address 

Factory Default = 192.168.1.47 
This field displays the last IP address that the DHCP server will provide. The 
DHCP End Address must be within the IP address and higher than the DHCP 
Start Address. You may use any number from 0 to 254 in this address.