Westell Inc. ULS3-C ユーザーズマニュアル
03/24/09 - DRAFT
030-300554 Rev. C
149
March 2009
Verizon FiOS Router (Model 9100EM)
User Guide
15.5 ARP Table
If you click the ARP Table link in the Advanced screen, the following screen appears. This screen allows you to set
up static DHCP connections using Host Names, IP Addresses, or MAC addresses. To configure a static DHCP
connection, click the New Static Connection link.
If you clicked New Static Connection, the following screen appears. Enter the appropriate values in the fields
provided, and then click OK to continue.
NOTE: You can have a total of 253 static LAN devices connected to your Verizon Router.
provided, and then click OK to continue.
NOTE: You can have a total of 253 static LAN devices connected to your Verizon Router.
• Enter a host name for this connection.
• Enter the fixed
• Enter the fixed
IP
address to assign to the computer.
• Enter the
MAC
address of the computer’s network card.
NOTE: A device’s fixed
IP
address is actually assigned to the specific network card’s
MAC
address installed on the
network computer. If this network card is replaced, the device’s entry in the
DHCP
Connections list must be updated
with the new network card’s
MAC
address.