Westell Inc. ULS3-C ユーザーズマニュアル

 

 
03/24/09 - DRAFT 
 
 

030-300554 Rev. C 

202 

   March 2009 

 

 
If you click Advanced in the top navigation menu and then select the Routing link, the following screen appears. 
You can choose to setup your Router to use static or dynamic routing. Dynamic routing automatically adjusts how 
packets travel on the network, whereas static routing specifies a fixed routing path to neighboring destinations. 
 
 

 
To create a new route, click the New Route link. If you change any settings in this screen, click Apply to save the 
settings. 
 

 

 
If you clicked New Route, the following screen appears. Configure the settings in this screen, and then click OK to 
continue. 
 

•  Rule Name—Select the type of network from the drop-down list. 
•  Destination—Enter the destination is the destination host, subnet address, network address, or default route. 

The destination for a default route is 0.0.0.0. 

•  Netmask—Enter the network mask is used in conjunction with the destination to determine when a route is 

used. 

•  Gateway—Enter the Router’s 

IP 

address. 

•  Metric—Enter the desired measurement of the preference of a route. Typically, the lowest metric is the most 

preferred route. If multiple routes exist to a given destination network, the route with the lowest metric is used.