Rhine Electronics Co Ltd 7081T ユーザーズマニュアル

 
 

SETING THE OPERATING CONTROLS 
 
 

1.This unit operates on a 9 volts battery (not included). 
      To prevent possible damage if the battery should leak , be sure to remove 
      the battery when the unit is not use . 
 
2.  Store the controller away from excess heat or humidity . 
 
3.  This remote control unit is requipped with 16 code combinations. To prevent 

  possible interference from or to other remote units such as garage door 
  openers, car alarm or security system .    If you find that your fan and light   
  kit go on and off without using your control , simply change the combination 
  code in your transmitter and receiver . 
 

4.Operation buttons on the panel of transmitter . 

  HIGH    key – For fan High speed . 
  MED    key – For fan Medium speed . 
  LOW    key – For fan Low speed . 
  OFF      key – For fan speed off . 
  REV      key – For fan speed Reverse . 
  LIGHT CONTROL    key(UP) – For light brightness and ON/OFF control . 

 

5.Start the fan : 

Press the selected speed button to run the fan at the desired . 
 

6.Turn off the fan : 

Press the OFF button . 

 
7.Light control : 

Turn the light on or off by only touching the LIGHT CONTROL    button . 
Keep pressing the button in excess of    0.7 second it becomes a dimmer , 
the light varies cyclically in    0.8 second . 
One of the important feature of this control is AUTO-RESUME . After power   
on , it allows the light return to where it was off . 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Page : 3-1