Rhine Electronics Co Ltd 7238T ユーザーズマニュアル
1
INSTRUCTIONS FOR OPERATION
SETING THE OPERATING CONTROLS
1.
1.
1.
1.
This unit operates on a 3 volts battery
(not included).
To prevent possible damage if the battery should leak , be sure to remove
the battery when the unit is not use .
the battery when the unit is not use .
2.
2.
2.
2.
Store the controller away from excess heat or humidity .
3.
3.
3.
3.
This remote control unit is required with 24bit code combinations. To prevent
possible interference from or to other remote units such as garage door
openers, car alarm or security system .
possible interference from or to other remote units such as garage door
openers, car alarm or security system .
4.
4.
4.
4.
Operation buttons on the panel of transmitter .
LED display
FAN SPEED
button
REV button – Fan reverse
Warm weather/Cool weather
FAN OFF button -
FAN OFF
LIGHT button -
Light ON/OFF or Dimmer
FAN SPEED
button -
(HIGH, MED, LOW)
REV button – Fan reverse
Warm weather/Cool weather
FAN OFF button -
FAN OFF
LIGHT button -
Light ON/OFF or Dimmer