Rhine Electronics Co Ltd 9051T ユーザーズマニュアル
Page 1/1
INSTRUCTIONS FOR OPERATION
SETTING THE OPERATING CONTROLS
1、 This device which one of black lines series with AC 120V power supply. Now, we
take 60Hz power supply to afford power supply of transmitter when it trough
rectify. So, there is no troubles with change batteries forever.
rectify. So, there is no troubles with change batteries forever.
2、 Store the controller away from excess heat or humidity.
3、 This remote control unit is required with 16 code combinations. To prevent
possible interference from or to other remote units such as garage door openers, car
alarm or security system. If you find that your fan and light kit go on and off
without using your control, simply change the combination code in your
transmitter and receiver.
alarm or security system. If you find that your fan and light kit go on and off
without using your control, simply change the combination code in your
transmitter and receiver.
4、 Operation buttons on the panel of transmitter.
HI
key- For fan High speed.
MED
key-For fan Medium speed.
LOW
key-For fan low speed.
Fan off
key-For fan speed Off.
LIGHT
key-For light brightness and ON/OFF control.
REV
key-For fan speed Reverse.
5、 Start the fan :
Press the selected speed button to run the fan at the desired.
6、 Turn off the fan:
Press the FAN OFF button.
7、 Light control:
Turn the light on or off by only touching the LIGHT
button.
Keep pressing the button in excess of 0.7 second it becomes a dimmer, the light
varies cyclically in 0.8 second.
varies cyclically in 0.8 second.
One of the important feature of this control is AUTO-RESUME. After power on, it
allows the light return to where it was off.
allows the light return to where it was off.