Toshiba Client Solutions CO. LTD. UPA3906WL ユーザーズマニュアル
37
EN
If the selected AP requires the password
4. authentication,
you will enter its setting screen.
Use the Direction Button to select the text and press
5.
the [OK] Button to confirm it.
Field
Description
Capital letters
Lower case letters
Numbers, symbols
When the setting is done, select
7.
the [Confirm] icon (
) to validate the password and connect to the
AP.
Or press the [Playback] Button/ select the
8. Return
icon
(
) to exit.
The screen shown [CONNECTION OK] indicates the
9.
connection is established.
When the connection is
10.
established, the signal strength
will show on the top of the screen.
The screen shown [CONNECTION FAILED] indicates
11.
the camcorder does not connect to the AP.
Note
This camcorder only supports the AP(SSID) named in English/number/symbols (ASCII
•
characters).
The possible reasons for “CONNECTION FAILED” could be (1) wrong password ; (2) you
•
are not in the wireless network area of the AP. (3) the camcorder does not support the type
of encryption used on the AP. This model only supports WEP/WPA/WPA2 personal type of
encryption, but not up to enterprise level (4)your network requires PPPoE account/password
information.
of encryption used on the AP. This model only supports WEP/WPA/WPA2 personal type of
encryption, but not up to enterprise level (4)your network requires PPPoE account/password
information.
You can only enter text in English, regardless of the OSD language.
•