Laird Controls North America Inc. 9116 ユーザーズマニュアル

Cattron Group International 

 

   

 

2.2.1.1 

Ensure that all cables are secured and connected properly. 

2.2.2.1 

Power on the System 

2.2.2.2  Check the power (Yellow LED) on the Transponder Reader.  The LED 

should be on continuously when 72VDC is supplied to the Reader. 

2.2.3.1 

Check the (Green LED) antenna signal going to the Transponder Reader.  
The LED should be on continuously to indicate that the 200Khz signal is 
being received from the Transponder Antenna. 

2.2.4.1 

Check the (Red LED) antenna signal going to the Transponder Reader. 
The LED should flash once every 15 seconds when 72VDC is supplied to 
the Reader. 

2.3.1.1 

If the power LED (Yellow LED) on the Transponder Reader is not lit, 
verify first that all connection points for the power cable are secure. 

2.3.1.2 

Also, verify that the power termination points are connected to the MCC 
terminal blocks. 

2.3.2.1 

If the antenna signal LED (Green LED) on the Transponder Reader is not 
lit, verify that all connection points for the antenna cable are secure. 

 

  

3/6