Laird Controls North America Inc. EXC9158A ユーザーズマニュアル
Edition 04/2007 US, Version A001, Excalibur, Subject to Technical Changes
Page: 3
1.
Safety Instructions
1.1 General Information on Safety
Persons under the influence of drugs and/or alcohol and/or other medicine that impairs the reaction may
not assemble, disassemble, install, put into operation, repair or operate the product.
All conversions and modifications of an installation/system must conform to the relevant safety
requirements. Work on the electrical equipment may only be performed by qualified, authorized personnel
and in accordance with the relevant safety requirements.
In the event of malfunctioning, the product must be stopped, switched off and the relevant master switches
must be switched off.
not assemble, disassemble, install, put into operation, repair or operate the product.
All conversions and modifications of an installation/system must conform to the relevant safety
requirements. Work on the electrical equipment may only be performed by qualified, authorized personnel
and in accordance with the relevant safety requirements.
In the event of malfunctioning, the product must be stopped, switched off and the relevant master switches
must be switched off.
Warning!
Do not fail to observe:
the statutory regulations and directives applicable for the intended purpose, e.g.:
Do not fail to observe:
the statutory regulations and directives applicable for the intended purpose, e.g.:
•
Accident prevention regulations
•
Safety rules and directives
•
Generally applicable statutory and other binding regulations for accident prevention
and environmental protection and general safety and health requirements.
and environmental protection and general safety and health requirements.
The user must instruct his personnel accordingly.
The Operating Manual must be kept permanently accessible at the place of use of the product.
The personnel assigned to work on/with the product must have read and understood this Operating
Manual and the safety instructions.
The safety instructions must, if necessary, be supplemented by the User with instructions concerning the
work organisation, work sequences, used personnel, etc.
Only trained personnel may perform the work with/on the product.
The User must ensure that the product is always operated in a perfect condition and that all applicable
safety requirements and regulations are observed.
The product must be put out of operation immediately when faults or functional irregularities are identified.
Product modifications, conversions or add-ons can impair the safety and may not be made without the
consent of the manufacturer.
Use only original spare parts from the manufacturer.
Observe the intervals for periodic inspection/maintenance mentioned in this Operation Manual or
otherwise mandatory.