Moseley Associates Inc 08MUD1F ユーザーズマニュアル
Installation
3-2
602-13729-01 Rev B
Expedio Digital Electronic News Gathering Radio
3.2.3 PRE-INSTALLATION
NOTES
Always pre-test the system on the bench in its intended configuration prior to installation at a
remote site. Avoid cable interconnection length in excess of 1 meter in strong RF environments.
We highly recommend installation of lightning protectors to prevent line surges from damaging
expensive components.
remote site. Avoid cable interconnection length in excess of 1 meter in strong RF environments.
We highly recommend installation of lightning protectors to prevent line surges from damaging
expensive components.
3.2.4 Information to Users
Changes or Modifications expressly not approved by Moseley Associates as this would render
the compliance of the equipment to be invalid. This would also render the user to operate the
equipment.
the compliance of the equipment to be invalid. This would also render the user to operate the
equipment.
3.3 Rack Mount
The product is normally rack-mounted in a standard 19” cabinet. Leave space clear above (or
below) the unit for proper air ventilation of the card cage. The rack ears are typically mounted as
shown in Figure 11. Other mounting methods are possible by changing the orientation of the rack
ears.
below) the unit for proper air ventilation of the card cage. The rack ears are typically mounted as
shown in Figure 11. Other mounting methods are possible by changing the orientation of the rack
ears.
Figure 11: Expedio Typical Rack Mount Bracket Installation
3.4 Rear Panel Connections & Indicators
Please refer to the Figure 12 and 13 for a pictorial of a typical product rear panel (internal
duplexer). Following is a descriptive text of the connections and LED indicators.
duplexer). Following is a descriptive text of the connections and LED indicators.