Moseley Associates Inc 08MUD1F ユーザーズマニュアル
1-5
System Description
602-13729-01 Rev B
Expedio Digital Electronic News Gathering Radio
1.3.2 Standalone
Operation
The Expedio may be used as a standalone simplex radio with a internal in the MPEG2 Encoder /
Decoder system or utilize external MPEG2 units and feed DVB-ASI with 188byte format on the
Input and have DVB-ASI out coming out on the Receiver.
Decoder system or utilize external MPEG2 units and feed DVB-ASI with 188byte format on the
Input and have DVB-ASI out coming out on the Receiver.
1.4 Regulatory Notices
FCC Part 15 Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his expense.
Any external data or audio connection to this equipment must use shielded cables.
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his expense.
Any external data or audio connection to this equipment must use shielded cables.
EC Declaration of Conformity
1.5 System Description
1.5.1 Introduction
The product is a simplex digital radio. The following sections describe the TX system, RX
system, followed by sub-system components. Please reference the accompanying block
diagrams for clarification.
system, followed by sub-system components. Please reference the accompanying block
diagrams for clarification.
We will follow the typical end-to-end progression of a radio system starting with the TX baseband
inputs, to the COFDM modulator, followed by the upconversion process and the power amplifier.
We then proceed to the RX preamplifier input, the down conversion process, followed by the
COFDM demodulator and baseband outputs.
inputs, to the COFDM modulator, followed by the upconversion process and the power amplifier.
We then proceed to the RX preamplifier input, the down conversion process, followed by the
COFDM demodulator and baseband outputs.