Tecom Co Ltd AW4038 ユーザーズマニュアル

 Manual Ver1.0

slight adjustment of this value is recommended. If a network packet 

is smaller than the preset RTS threshold size, the RTS/CTS

mechanism will not be enabled. AW4038 sends Request to Send

(RTS) frames to a particular receiving station and negotiates the 

transmission of a data frame. After receiving an RTS, the wireless

station responds with a Clear to Send (CTS) frame to acknowledge 

the right to begin transmission.

DTIM Interval: This value, between 1 and 255 milliseconds, indicates the interval of 

the Delivery Traffic Indication Message (DTIM). A DTIM interval is 

a countdown field which is used to inform clients about the next 

window for listening to broadcast and multicast messages. When

AW4038 has buffered broadcast or multicast for associated clients, it 

sends the next DTIM with a DTIM Interval value. Its clients hear the

beacons and awaken to receive the broadcast and multicast message.

Default: 3.

Beacon Interval: Enter a value between 1 and 65535 milliseconds. The Beacon 

Interval indicates the frequency interval of the beacon. A beacon is 

a packet broadcast by AW4038 to synchronize the wireless 

network. Default: 100.

54g Mode: There are 3 selections. Select 54g Auto for the widest compatibility. Select 

54g Performance for the fastest performance. Select 54g LRS if you are 

experiencing difficulty with legacy 802.11b equipment.

54g protection: In Auto mode, AW4038 will use RTS/CTS to improve 802.11g

performance in mixed 802.11g/802.11b network. Turn off protection 

to maximize 802.11g throughput under most conditions. 

                                                                                                                                          - 45 -