Lectrosonics Inc LMBC1 ユーザーズマニュアル

ページ / 20
Digital Hybrid Wireless Belt-Pack Transmitter
Rio Rancho, NM
19
Service and Repair
If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment 
needs repair. Make sure you have followed the setup procedure and operating instructions. Check the interconnecting 
cables and then go through the Troubleshooting section in this manual.
We strongly recommend that you do not try to repair the equipment yourself and do not have the local repair shop at-
tempt anything other than the simplest repair. If the repair is more complicated than a broken wire or loose connection, 
send the unit to the factory for repair and service. Don’t attempt to adjust any controls inside the units. Once set at the 
factory, the various controls and trimmers do not drift with age or vibration and never require readjustment. There are 
no adjustments inside that will make a malfunctioning unit start working
.
LECTROSONICS’ Service Department is equipped and staffed to quickly repair your equipment. In warranty repairs 
are made at no charge in accordance with the terms of the warranty. Out-of-warranty repairs are charged at a modest 
flat rate plus parts and shipping. Since it takes almost as much time and effort to determine what is wrong as it does 
to make the repair, there is a charge for an exact quotation. We will be happy to quote approximate charges by phone 
for out-of-warranty repairs.
Returning Units for Repair
For timely service, please follow the steps below:
A. DO NOT return equipment to the factory for repair without first contacting us by email or by phone. We need 
to know the nature of the problem, the model number and the serial number of the equipment. We also need a 
phone number where you can be reached 8 A.M. to 4 P.M. (U.S. Mountain Standard Time).
B. After receiving your request, we will issue you a return authorization number (R.A.). This number will help speed 
your repair through our receiving and repair departments. The return authorization number must be clearly shown 
on the outside of the shipping container.
C. Pack the equipment carefully and ship to us, shipping costs prepaid. If necessary, we can provide you with the 
proper packing materials. UPS is usually the best way to ship the units. Heavy units should be “double-boxed” for 
safe transport.
D. We also strongly recommend that you insure the equipment, since we cannot be responsible for loss of or dam-
age to equipment that you ship. Of course, we insure the equipment when we ship it back to you.
Lectrosonics USA:
Mailing address: 
 
Shipping address: 
 
Telephone: 
Lectrosonics, Inc. 
 
Lectrosonics, Inc. 
 
(505) 892-4501 
PO Box 15900 
 
581 Laser Rd.   
 
(800) 821-1121 Toll-free 
Rio Rancho, NM 87174 
Rio Rancho, NM  87124  
(505) 892-6243 Fax 
USA 
   USA
 
 
 
 
Web: 
   E-mail: 
www.lectrosonics.com  
sales@lectrosonics.com
Lectrosonics Canada:
Mailing 
Address: 
 Telephone: 
  E-mail: 
49 Spadina Avenue,   
(416) 596-2202  
 
Sales:    colinb@lectrosonics.com 
 
Suite 
303A 
  (877) 
753-2876 
Toll-free 
 Service: 
 
joeb@lectrosonics.com 
Toronto, Ontario M5V 2J1 
(877-7LECTRO) 
 
   (416) 
596-6648 
Fax