Lectrosonics Inc UM400E ユーザーズマニュアル

11

NOTE: This termination is intended for UHF 

transmitters only. VHF transmitters with 5-pin 

jacks require a different termination. Lectrosonics 

lavaliere microphones are terminated for 

compatibility with VHF and UHF transmitters, 

which is different than what is shown here.

Microphone Cable Termination 

for Non-Lectrosonics Microphones

TA5F Connector Assembly

Mic Cord Stripping Instructions

1

2

3

4

5

VIEW FROM SOLDER

SIDE OF PINS

0.3"

0.15"

Crimping to Shield and Insulation

Strip and position the cable so that the clamp 

can be crimped to contact both the mic cable 

shield and the insulation. The shield contact 

reduces noise with some microphones and the 

insulation clamp increases ruggedness.