Computime Limited AAHZT21 ユーザーズマニュアル
July 5, 2012
Page 5 of 49
66 8003 002-7
2. Software installation
2.1 Installing an option
If the Orion EMS option (and Online option) has been ordered together with the VISIONLINE software, it is
included in the license code and will be set in the software when the license code is entered.
included in the license code and will be set in the software when the license code is entered.
If the option(s) should be added to the system at a later occasion, when the license code has already been entered
and system ID is therefore set, an option code is used instead. Several software options can be included in one
option code. An operator with the authority to handle option codes must be logged on. Normally, options are
set by the system manager or the distributor.
and system ID is therefore set, an option code is used instead. Several software options can be included in one
option code. An operator with the authority to handle option codes must be logged on. Normally, options are
set by the system manager or the distributor.
When ordering the option, the system code must be communicated to the ordering department:
1.
Double click on
System settings
under the
Reports
tab in the navigation window of VISIONLINE.
System settings
is available even if you are not logged on.
2.
Communicate your system code to the order department; see order acknowledgement for phone number
and e-mail address. The system code can also be entered in the Ordering web page when making the order.
and e-mail address. The system code can also be entered in the Ordering web page when making the order.
To install an option:
1.
Go to
Tools/Option code
in VISIONLINE.
2.
Enter the option code and click
Apply
.
2.2 Installing an Orion EMS client
If there should be a separate Orion EMS client (see chapter 1 for more information), this is installed according to
the ReadMe file for the applicable operating system. The ReadMe files are found on the Orion EMS software CD.
the ReadMe file for the applicable operating system. The ReadMe files are found on the Orion EMS software CD.
2.2.1 Starting an Orion EMS client
1.
Click the
Start
button and go to
Programs/Orion EMS/Orion EMS
.
2.
When requested, log on with the same user ID and password as for VISIONLINE.