Computime Limited CTL3082 ユーザーズマニュアル
7
System menu
To join a network and connect to the utility company:
1. Enter the ‘System’ menu.
2. The default status should be “No Network”. The
2. The default status should be “No Network”. The
Channel should display “Auto”.
3. Press (2) to scan and join a network.
4. The status will update and show ‘Joined Network’ if it
4. The status will update and show ‘Joined Network’ if it
successfully connects to your utility meter. It will
display ‘Joined Failed’ if your connection was
unsuccessful. It takes approximately one minute for
the connection process to complete. If you
experience problems connecting to your utility network, please contact your utility company.
display ‘Joined Failed’ if your connection was
unsuccessful. It takes approximately one minute for
the connection process to complete. If you
experience problems connecting to your utility network, please contact your utility company.
To disconnect from a network:
1. Enter the ‘System’ menu.
2. ‘Lv Nwrk’ appears on the screen. Press (2) to exit the
2. ‘Lv Nwrk’ appears on the screen. Press (2) to exit the
network.
Note: PANID/Extern PANID/E01 Address/VERSION – are all
codes that you may be asked to supply if you phone to the
utility company for technical support.
codes that you may be asked to supply if you phone to the
utility company for technical support.
Settings menu
To change the LCD brightness:
1. Enter the ‘Settings’ menu.
2. Press (2) to select ‘LCD Brightness’. Use (3) or (4) to adjust the brightness of the LCD screen.
2. Press (2) to select ‘LCD Brightness’. Use (3) or (4) to adjust the brightness of the LCD screen.