Sennheiser Electronic Corp RRFLEX ユーザーズマニュアル
EN Using the Flex 5000
20 |
Flex 5000
Selecting a hearing profile for sound
enhancement
enhancement
The hearing profiles alter the sound of the audio signal in
order to especially improve the speech intelligibility. The pro-
files are used to specifically change certain frequency ranges
by e.g. boosting or attenuating low-frequency or high-fre-
quency tones.
order to especially improve the speech intelligibility. The pro-
files are used to specifically change certain frequency ranges
by e.g. boosting or attenuating low-frequency or high-fre-
quency tones.
All three hearing profiles feature a compression function
which compensates for volume differences by boosting the
volume of quiet passages and reducing the volume of loud
passages if necessary.
which compensates for volume differences by boosting the
volume of quiet passages and reducing the volume of loud
passages if necessary.
Displaying the activated hearing profile
The activated hearing profile is not permanently displayed.
To check the activate hearing profile:
왘
Switch your receiver on (see page 15).
왘
Briefly press the Hearing profile button on the transmitter.
The currently activated hearing profile is displayed for
10 seconds.
The currently activated hearing profile is displayed for
10 seconds.
The balance setting is saved on the receiver. If you are
using several receivers with a transmitter, the respec-
tive receivers are optimally adjusted to match the per-
sonal hearing preferences of the users (e.g. you and
your partner). Please note that the personal hearing
preferences can only be adjusted when only receiver is
connected to the transmitter.
using several receivers with a transmitter, the respec-
tive receivers are optimally adjusted to match the per-
sonal hearing preferences of the users (e.g. you and
your partner). Please note that the personal hearing
preferences can only be adjusted when only receiver is
connected to the transmitter.
Pro
file
file
Hearing profile LED
Meaning
Com
pres
sion
pres
sion
–
No segment lit
The sound from the con-
nected audio source is
reproduced unchanged.
nected audio source is
reproduced unchanged.
no
2s
Flex_5000_570735_0117_PRT.book Seite 20 Montag, 10. Oktober 2016 3:58 15