Kenwood USA Corporation 33293110 ユーザーズマニュアル
23
SAFETY INFORMATION:
Your wireless hand-held portable transceiver has been designed using a
low power transmitter.
When the PTT switch is pressed, the transceiver generates radio
frequency (RF) electromagnetic energy (EME).
This transceiver is designed to comply with the FCC Report and Order
FCC 96-326 (August, 1996).
Your wireless hand-held portable transceiver has been designed using a
low power transmitter.
When the PTT switch is pressed, the transceiver generates radio
frequency (RF) electromagnetic energy (EME).
This transceiver is designed to comply with the FCC Report and Order
FCC 96-326 (August, 1996).
• Do not transmit for more than 50% of the total operating time.
Transmitting for over 50% of the operating time may exceed the
FCC RF exposure compliance requirements. Transmission occurs
while you are pressing the PTT switch and is confirmed by the
transmission icon that appears on the display while transmitting.
FCC RF exposure compliance requirements. Transmission occurs
while you are pressing the PTT switch and is confirmed by the
transmission icon that appears on the display while transmitting.
• To transmit, speak into the microphone in your normal voice while
holding the transceiver upright and keep the antenna at least 2
inches (5 cm) from your head and body.
inches (5 cm) from your head and body.
• When using a headset, ensure that the antenna is at least 2 inches
(5 cm) away from your body whenever you are transmitting.
• Use only KENWOOD genuine accessories and the supplied
antenna. Unauthorized antennas, modifications, or attachments
may damage the transceiver and violate FCC rules and
regulations.
may damage the transceiver and violate FCC rules and
regulations.