Kenwood USA Corporation 415101 ユーザーズマニュアル

7

your dealer can activate a variety of transceiver functions to 

perform without any additional operation on your part.

the time-out timer is used to prevent you from using a 

channel for an extended duration .  if you continuously transmit 

for a preset time, the transceiver will stop transmitting and an 

alert tone will sound.  Release the PTT switch.

The Battery Saver decreases the amount of power used when 

a signal is not being received and no operations are being 

performed .

Low Battery Warning alerts you when the battery needs to be 

recharged .  your dealer can set an alert tone to sound and 

the LED indicator to blink red when the battery power is low.  

recharge or replace the battery pack at this time .

PTT ID is the transceiver unique ID code which is sent each 

time the PTT switch is pressed and/or released.

if programmed by your dealer for a channel, the compander 

will remove excessive noise from transmitted signals, to 

provide higher clarity of signals .

If BCL is set up by your dealer, you will be unable to transmit if 

the channel is already in use.  Use a different channel or wait 

until the channel becomes free .