Harman International Industries Inc MICROCORE ユーザーズマニュアル
Micro Series
1-26 Micro Series
Document generated: 04.10.17
SW V1.2
Only one jingle can be played at the time. Starting another jingle stops the
currently playing jingle and starts the next one.
currently playing jingle and starts the next one.
;{
Z
button.
button.
Starting
/Restarting a jingle
Pressing a Jingle button triggers the following actions :
;
'
Z
If PFL is active, the Jingle Player channel is set to OFF.
Stopping a jingle
A currently playing jingle can be stopped by either turning the Jingle Player
Channel to OFF or pressing the STOP button in the Play View page.
Playback of a Jingle stops automatically at its end without any user action.
When playback is stopped, the Jingle Player Channel is automatically
switched to channel OFF.
Channel to OFF or pressing the STOP button in the Play View page.
Playback of a Jingle stops automatically at its end without any user action.
When playback is stopped, the Jingle Player Channel is automatically
switched to channel OFF.
Note 1 :
If the Jingle Player Channel is set to ON, eventhough no Jingle is playing,
the Jingle Player Channel is On Air.
As in the GUI, there is no fader to this channel, the On Air state is simply
activated by the channel ON/OFF button.
the Jingle Player Channel is On Air.
As in the GUI, there is no fader to this channel, the On Air state is simply
activated by the channel ON/OFF button.
Note 2 :
There is a difference to Micro Series mixers with connected Micro Fader
modules. In the case of connected Micro Fader module, the Jingle Player
Channel can have a fader - which then also has an effect on the On Air state
of the Jingle Player Channel.
modules. In the case of connected Micro Fader module, the Jingle Player
Channel can have a fader - which then also has an effect on the On Air state
of the Jingle Player Channel.