RELM Communications Inc SRU50ABC ユーザーズマニュアル
S Series Repeater USER MANUAL
©RELM Communications Inc. Revision 1.0
26
Thermal controlled fan.
RF Rise Time:
4mS with continuous VCO selected
(Controlled RF envelope).
(Controlled RF envelope).
Receiver Module Specifications
Sensitivity:
Better than -117dBm for 12dB ( 25 KHz spacing ), C-
weighted, De-emphasis. Typical -120dBm
weighted, De-emphasis. Typical -120dBm
Selectivity 66-520MHz (Option):
More than 80 dB for 25 KHz adj channel, more than 70 dB for
12.5 KHz adj channel, for switching BW 10MHz minimum.
12.5 KHz adj channel, for switching BW 10MHz minimum.
Selectivity 66-520MHz:
More than 75 dB for 25 KHz adj channel, more than 65 dB for
12.5 KHz adj channel, for switching BW same as band
allocation.
12.5 KHz adj channel, for switching BW same as band
allocation.
Selectivity 805-960MHz:
More than 70 dB for 25 KHz adj channel more than 65 dB for
12.5 KHz adj channel for switching BW same as band
allocation.
12.5 KHz adj channel for switching BW same as band
allocation.
Spurious Resp:
Better than 90dB.
Intermodulation:
Better than 80dB.
Blocking:
Better than 100dB at +/- 1MHz point.
Distortion:
Less than 2%.
S/N Ratio:
Better than 50dB C-weighted, wide band. Better than 44dB C-
weighted, narrow band .
weighted, narrow band .
RF Switching Bandwidth:
10MHz minimum or equal to band allocation.
Receiver Front End BW:
Equal to band allocation, no retuning.
Audio Bandwidth:
DC to 3400Hz (-0.5dB)
Squelch Opening Time:
20mS.
Squelch Closing Time:
100mS.
Conducted Spurious:
Less than -57dBm, typ -90dBm.
Ancillaries
Tx Timer:
2 minutes, on/off selectable.
VF Level to Line:
+6 to -15dBm, 600 ohms unbalanced or differential.
VF Level from Line:
+6 to -15dBm, 600 ohms unbalanced
Pre-Emphasis Accuracy:
Within +/-0.5dB of 6dB per octave curve.
De-Emphasis Accuracy:
Within +/-0.5dB of 6dB per octave curve.
VF Compressor Range:
>30dB for line input,
Control Outputs:
1K ohm 5V source/sink available.
Alarm Output:
Open collector.
PTT Input:
Logic or Opto-isolated +/- 5 to 48V.
Channel Select:
8 way Dip switch or RS232 or BCD
Repeater Tail Timer:
2 seconds nominal.