Raytheon Anschuetz GmbH High Seas Products MTX5 ユーザーズマニュアル

Chapter 2: Installing the Scanner

Display unit connection

CAUTION
Do not use the 48" open array scanner with an SL70 or Autohelm 7” LCD
display unit. Failure to observe this may result in permanent damage to
the display unit.

The rear of the Pathfinder display provides the following connection sockets:

• Scanner connection

• HSB, for connecting to another HSB Series display (such as a chartplotter or

second radar display) – not available on SL70 display

• SeaTalk, for SeaTalk data input and output and connecting to another HSB

Series display (such as a chartplotter or second radar display)

• NMEA Output – not available on SL70 display:

Note: For the SL70 display, NMEA OUT can be selected instead of SeaTalk.

• Power/NMEA Input, for 12 V, 24 V or 32 V (open array) DC power

connection, two NMEA 0183 inputs and one RF ground (screen)
connection.

Connect the scanner cable to the scanner connector (5) and power to the power/
NMEA input connector (3).
Power and all other connector details are supplied in the display unit Owner’s
Handbook.

POWER/

NMEA

ANTENNA/

TRANSDUCER

NMEA

SeaTalk

DISPLAY

FUSE

HSB

LCD Display Connector Panel

CRT Display Connector Panel

D4597_1

1 NMEA Output 2 HSB 3 Power and NMEA Input 4 SeaTalk 5 Scanner

154_2c2.p65

13/05/99, 13:18