E F Johnson Company 2425333 ユーザーズマニュアル
5300 ES Series Mobile Radio Operating Manual
3-1
S
E C T I O N
3
Section3
General Operation
This section provides general information about the operation of the 5300 ES Mobile
radios. The following information is discussed:
radios. The following information is discussed:
• Turning Power ON/OFF and Setting the Volume
• Passwords
• Backlight controls and display viewing
• Displaying and Selecting Zones/Channels
• Setting Squelch Control
• Transmit Disable
• Radio Operating Modes
• Radio Tune Test Mode
3.1
Turning Power ON and Setting Volume
Power is turned ON and OFF by pressing the ON-OFF /Volume knob. When power is
turned ON, the radio goes through a self test. When that is successfully completed,
software version, unit ID, zone, then channel are briefly displayed (except when a
conventional analog channel is selected), a tone sounds (if tones are enabled), and the
radio is ready for normal operation. If “ENTER PSWD” is briefly displayed, refer to the
next section.
turned ON, the radio goes through a self test. When that is successfully completed,
software version, unit ID, zone, then channel are briefly displayed (except when a
conventional analog channel is selected), a tone sounds (if tones are enabled), and the
radio is ready for normal operation. If “ENTER PSWD” is briefly displayed, refer to the
next section.
The radio can be programmed so that one of the following combinations are selected at
power up:
power up:
• Last Zone/Last Channel