Multi-Tech Systems 92U10E06831 ユーザーズマニュアル
PART 2 – Cellular SocketModems
Chapter 6 – SocketModem Cell and iCell – EV-DO
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342M)
106
Reliability (from Rodney's specs)
Test
Standard
Description
Test Location
Hot Dwell – 16 hr
EN60068-2-2
Functionally test product at upper temperature limit for 16
hours. Test Bb
hours. Test Bb
Multi-Tech
Cold Dwell – 16 hr EN60068-2-1
Functionally test product at lower temperature limit for 16
hours. Test Ab
hours. Test Ab
Multi-Tech
Temperature
Cycling
Cycling
EN60068-2-14 Test Nb. Gradual Change
Multi-Tech
Radio Breakpoint
The highest temperature at which the radio functions
before the product fails.
before the product fails.
Multi-Tech
Vibration (Sine)
SAE J1455
Cab mounted, 1.04G overall rms level, X,Y,Z axes 60
minute duration each axis. 10-500hz sweep
minute duration each axis. 10-500hz sweep
Outside Lab
Vibration (Random) SAE J1455
Cab mounted, Transverse axis plot, X,Y,Z axes 60 minute
duration each axis. 10
duration each axis. 10
-
500hz sweep
Outside Lab
Drop Test
SAE J1455
Handling drop, 1 meter height, unpackaged
Multi-Tech
Power Cycle Test
1000 on/off power cycles or 24 hour duration
Multi-Tech
4-Corners Test
Verify product operates at four points.
High Temp Limit with max voltage limit
High Temp Limit with min voltage limit
Low temp limit with max voltage limit
Low temp limit with min voltage limit
High Temp Limit with min voltage limit
Low temp limit with max voltage limit
Low temp limit with min voltage limit
Multi-Tech
Cold Start Test
One hour dwell at 0C, then power-up and test. One hour
dwell at –10C, then power-up and test. Repeated until
lowest power-up temperature reached.
dwell at –10C, then power-up and test. Repeated until
lowest power-up temperature reached.
Multi-Tech
Power Draw
Measure the power consumption of each version of this
product
product
Multi-Tech
MTBF Report
Calculate the sum of the individual part failure rates that
make up the product
make up the product
Multi-Tech
RF Connection and Antenna
The RF connector on the SocketModem is an UFL standard type. See Chapter 1 for Antenna System details.
Preliminary
Confidential