Multi-Tech Systems 92U10E06831 ユーザーズマニュアル
PART 3 – Analog SocketModems
Chapter 8 – SocketModem (MT5692SMI)
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342M)
126
Technical Specifications
The MT5692SMI SocketModems meet the following specifications:
Category
Description
Data Standards
V.92, V.34, V.32bis, V.32, V.23, V.23 half-duplex, V.23 reverse, V.22bis, V.22bis Fast
Connect, V.22, V.21, Bell 212A/Bell 103, V.29 FastPOS, V.80 Synchronous Access Mode
(V.80 not for IP build)
Connect, V.22, V.21, Bell 212A/Bell 103, V.29 FastPOS, V.80 Synchronous Access Mode
(V.80 not for IP build)
Data Format
All Builds: Serial, asynchronous
Parallel Build: 8-bit parallel interface
Parallel Build: 8-bit parallel interface
Character Format
10 bit
Serial/Data Speeds
All Builds Except IP: Supports DTE speeds up to 230.4K bps, autobaud up to 115.2K bps
For IP Build: Supports DTE speeds up to 921.6K bps,
For IP Build: Supports DTE speeds up to 921.6K bps,
Client-to-Client Data
Rates
Rates
33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200,
4800, 2400, 1200, 0-300 bps
4800, 2400, 1200, 0-300 bps
Data Error Correction
V.42 LAPM and MNP 2–4
Data Compression
V.44, V.42bis, MNP 5
Fax Compatibility
All Builds Except IP: V.17, V.29, V.27ter, V.21 channel 2
Fax Class
All Builds Except IP: Class 1, Class 1.0
Modes of Operation
Full duplex over dial-up lines; data mode, command mode, online command mode
Size
2.54" (64.541 mm) x 1.045" (26.543 mm)
Weight
0.6 oz. (0.017 kg.)
Operating Temperature
-40º to +85° C
Storage Temperature
-40º to +85° C
Humidity
20% to 90% (non-condensing)
Operating Voltage
3.3V or 5V
Note: Voice modules are available with 5V only
Note: Voice modules are available with 5V only
Transmit Level
-12 dBm (varies by country)
Receiver Sensitivity
-43 dBm under worst-case conditions
DAA Isolation
1.5Kv r.m.s. or 2121 VDC at working voltage of 250VAC
Flow Control
All Builds Except IP: XON/XOFF (software), RTS/CTS (hardware)
Command Buffer
60 characters
Telephony/TAM
All Builds Except Voice:
V.253 commands
8 kHz sample rate
Concurrent DTMF, distinctive ring, and "Bell Core Type 1" Caller ID
8-bit μ-law and A-law PCM coding
Supports PCM Encoding:
8 kHz sample rate
Concurrent DTMF, distinctive ring, and "Bell Core Type 1" Caller ID
8-bit μ-law and A-law PCM coding
Supports PCM Encoding:
2-bit and 4-bit ADPCM, 8-bit and 16-bit linear PCM, and 4-bit IMA coding
Voice Build:
Voice build has a microphone for speakerphone function
Internet Protocols
For IP Build Only:
Internet Protocols Supported: Dial-in PPP, DNS, FTP, ICMP,IP, LCP, PPP, SMTP,
SNTP, TCP, UDP Socket
Authentication Protocols: CHAP, Dial-up Script, PAP
Internet Protocols Supported: Dial-in PPP, DNS, FTP, ICMP,IP, LCP, PPP, SMTP,
SNTP, TCP, UDP Socket
Authentication Protocols: CHAP, Dial-up Script, PAP
Compliance
EMC Compliance
FCC Part 15 (Class B)
ICES-003 (Class B)
EN 55022 (Class B)
EN 55024
EN 55022 (Class B)
EN 55024
Safety Compliance
UL 60950-1
cUL 60950-1
EN 60950-1
AS/NZS 60950:2000
cUL 60950-1
EN 60950-1
AS/NZS 60950:2000
Telecom
47 CFR Part 68
CS-03
R&TTE
CS-03
R&TTE
A-Tick (Other countries included per the Modem Globalization Guide)
Warranty
2 years
Preliminary
Confidential