Multi-Tech Systems 92U10E06831 ユーザーズマニュアル

ページ / 177
PART 2 – Cellular SocketModems 
Chapter 5 – SocketModem Cell and iCell – HSPA 
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342M) 
89 
 
Pin-Out Specifications (from Rodney's specs) 
Pin 
Signal Name 
Logic Level 
Voltage* 
I/O 
Description 
J18 
SPI SPCK 
3.3 
SPI clock signal 
J19 
SPI MISO 
3.3 
SPI master-in/slave-out 
J20 
SPI MOSI 
3.3 
SPI master-out/slave-in 
J21 
SPI CS 
3.3 
SPI chip select 
J24 
~RESET 
3.3 – 5.0 
Device reset (active low) 
J25 
USB VBUS 
3.3 – 5.0 
USB power supply input 
J26 
GND 
GND 
GND 
Ground 
J27 
USB DP 
3.3 
I/O 
USB data 
J28 
USB DM 
3.3 
I/O 
USB data 
J33 
~RTS 
3.3 – 5.0 
Request to send (active low) 
J34 
~RXD 
(3.3) / 5.0 
Received data (active low) 
J35 
~TXD 
3.3 – 5.0 
Transmitted data (active low) 
J36 
~RI 
(3.3) / 5.0 
Ring indicator (active low) 
J37 
~DSR 
(3.3) / 5.0 
Data set ready (active low) 
J38 
~CTS 
(3.3) / 5.0 
Clear to send (active low) 
J39 
~DCD 
(3.3) / 5.0 
Data carrier detect (active low) 
J40 
~DTR 
3.3 – 5.0 
Data terminal ready (active low) 
J41 
GND 
GND 
GND 
Ground 
J48 
GPIO0 
3.3 
I/O 
User configurable general purpose I/O 
J49 
GPIO1 
3.3 
I/O 
User configurable general purpose I/O 
J50 
GPIO2 
3.3 
I/O 
User configurable general purpose I/O 
J51 
GPIO3 
3.3 
I/O 
User configurable general purpose I/O 
J55 
HEARTBEAT 
3.3 
Heartbeat from processor 
J58 
~LED LINK 
3.3 
Link status (active low, can sink up to 150mA) 
J61 
VCC 
5.0 
PWR 
DC input power 
J63 
GND 
GND 
GND 
Ground 
*Note:  A hyphen (-) indicates a range of acceptable logic levels, whereas a slash (/) indicates a build option for one or 
the other. Values in parenthesis are unlikely to be used. 
 
Serial Model Pin Out 
24, 26, 33-41, 61, 63 
Included models: MTSMC-H4-IP, MTSMC-H4-GP 
 
USB + Serial + GPIO + GPS Data Pin Out 
With current PCB: 24-28, 33-41, 48-51, 58, 61, 63 
With next PCB rev: 16-17, 22-28, 33-43, 48-51, 58, 61, 63+ New GPS data pin 
Included models: MTSMC-MI-H4-IP, MTSMC-MI-H4-GP 
Note: The current revision PCB will not accommodate the following pins: 22-23, 42-43 and the new GPS 
data pins 16-17. The Universal Socket Developer Guide shall highlight the fact that while these pins are not 
present upon product launch they will be present on the next HW release. They must make design 
considerations even if they have no plans on using those pins.  
 
USB Only Pin Out  
24-28, 41, 61, 63 (7-levels for internal use may include additional pins) 
Included models: MTSMC-U-H4 
 
 
 
Preliminary  
Confidential