Multi-Tech Systems 92U12616836 ユーザーズマニュアル
DEVELOPER BOARD AND SCHEMATICS
Board Components
Jumper
Description
JP3, JP4, JP5, JP48
Selects CGND or GND for antenna holder grounding. Default is CGND.
JP6
JP6 allows you to select either the internal 5V regulator (INT PWR) or to choose EXT
5V (EXT PWR). For the EXT PWR, you can use your own external 5V power source
and plug it into J11.
5V (EXT PWR). For the EXT PWR, you can use your own external 5V power source
and plug it into J11.
JP43, JP44
Not used by PCIe devices.
JP45
Board Power. Default is installed.
JP49
Probes for connecting speaker.
JP50
Probes for connecting microphone.
JP51, JP52
Debugging probes for PCIE connector J23.
JP53, JP54
Selects USB host connected to PCIe device. Pins 1 & 2 jumpered selects external USB
host connected to J4.
host connected to J4.
JP57, JP58
Selects USB host connected to quad serial UART U20. Pins 1 & 2 jumpered selects
external USB host connected to J24.
external USB host connected to J24.
JP59, JP60, JP61,JP63,JP64, Selects serial connection for PCIe device. Pins 1 & 2 jumpered selects DB9 connector
JP69
JP69
J1 connected to PCIe device. Pins 2 & 3 jumpered selects quad UART U20 connected
to PCIe device. All jumpers must be moved to the same position.
to PCIe device. All jumpers must be moved to the same position.
JP65, JP66, JP67, JP68
Selects serial connection for PCIe Bluetooth device. Pins 1 & 2 jumpered selects DB9
connector J14 connected to PCIe Bluetooth device. Pins 2 & 3 jumpered selects quad
UART U20 connected to PCIe Bluetooth device. All jumpers must be moved to the
same position.
connector J14 connected to PCIe Bluetooth device. Pins 2 & 3 jumpered selects quad
UART U20 connected to PCIe Bluetooth device. All jumpers must be moved to the
same position.
JP70
Probes for PCIe GPIO2 & GPIO3. The pin next to the text "GPIO_3.3V" is GPIO3. The
center pin is GPIO2.
center pin is GPIO2.
JP73, JP74
Not used by PCIe devices.
JP75, JP76, JP77, JP78
When these jumpers are installed, DVI interface of audio codec U84 is connected to
DVI interface of PCIe device. By removing these jumpers when connecting an
external DVI device.
DVI interface of PCIe device. By removing these jumpers when connecting an
external DVI device.
JP79, JP80
Use these jumper pins to connect an external DVI device.
JP81, J82
Selects source for programming audio codec U84. Pins 1 & 2 jumpered selects
MICRO U84 as source. Default is MICRO.
MICRO U84 as source. Default is MICRO.
JP83, JP84
These pins can be used for programming MICRO U84.
JP85
Selects power source for MICRO U85. Default is 1.8v
JP86
May be used to manually reset PCIe Bluetooth device by briefly installing and then
removing a jumper. Default is no jumper installed.
removing a jumper. Default is no jumper installed.
JP87
Not applicable for this device.
JP88
May be used to manually reset PCIe Wi-Fi device by briefly installing and then
removing a jumper. Default is no jumper installed.
removing a jumper. Default is no jumper installed.
JP89
This jumper, when installed, connects power to PCIe device.
30
MultiConnect
TM
PCIe MTPCIE-H5/MTPCIE-BW Developer Guide