Vertex Standard USA Inc. 11134620 ユーザーズマニュアル
EVX-531 O
pErating
M
anual
9
Rotate the VOL/PWR
knob to set the volume
level. If no signal is
present on the analog
channel, press and hold
in the SIDE-1 button
level. If no signal is
present on the analog
channel, press and hold
in the SIDE-1 button
(under the PTT switch)
more than 2 seconds;
background noise will
now be heard, and you
may use this to set the
VOL/PWR knob for the
background noise will
now be heard, and you
may use this to set the
VOL/PWR knob for the
desired audio level. Press and hold the SIDE-1
button more than 2 seconds (or press the SIDE-1
button twice) to quiet the noise and resume nor-
mal (quiet) monitoring.
mal (quiet) monitoring.
o
pEratIon
To transmit, monitor the
channel and make sure it
is clear.
is clear.
Press and hold the PTT
switch. Speak into the
microphone area of the
front panel grille in a normal voice level. To re-
turn to the Receive mode, release the PTT switch.
microphone area of the
front panel grille in a normal voice level. To re-
turn to the Receive mode, release the PTT switch.
Press the (Orange) TOP
SEL key or SIDE-2
button to activate one
of the pre programmed
functions which may
have been enabled at the
time of programming
by the dealer. See the
next section for details
regarding the available
features.
of the pre programmed
functions which may
have been enabled at the
time of programming
by the dealer. See the
next section for details
regarding the available
features.
3
FCC ID: AXI11134620
IC: 10239A-11134620