Vertex Standard USA Inc. 11134620 ユーザーズマニュアル
EVX-531 O
pErating
M
anual
18
a
dvancEd
o
pEratIon
c
all
1
to
c
all
3
Press (or press and hold) the assigned Programmable
key to send a 2-tone sequential tone group which is
pre-defined.
key to send a 2-tone sequential tone group which is
pre-defined.
s
pEEd
d
Ial
Press (or press and hold) the assigned Programmable
key to prepare the Speed Dial function. Press the PTT
key to prepare the Speed Dial function. Press the PTT
switch within 5 seconds of releasing the key to send a
DTMF tone which is pre-defined.
DTMF tone which is pre-defined.
c
all
Press (or press and hold) the assigned programmable
key to send a 2-tone sequential tone.
key to send a 2-tone sequential tone.
tx s
avE
d
IsaBlE
Press (or press and hold) the assigned Programmable
key to disable the Transmit Battery Saver, if you are
operating in a location where high power is almost
always needed.
The Transmit Battery Saver helps extend battery life
by reducing transmit power when a very strong signal
from an apparently nearby station is being received.
Under some circumstances, though, your hand-held
radio may not be heard well at the other end of the
communication path, and high power may be neces-
sary at all times.
key to disable the Transmit Battery Saver, if you are
operating in a location where high power is almost
always needed.
The Transmit Battery Saver helps extend battery life
by reducing transmit power when a very strong signal
from an apparently nearby station is being received.
Under some circumstances, though, your hand-held
radio may not be heard well at the other end of the
communication path, and high power may be neces-
sary at all times.
l
ocK
Press (or press and hold) the assigned Programmable
key to lock the CH Selector knob, Programmable
key to lock the CH Selector knob, Programmable
keys, and PTT switch. The precise lockout configura-
tion is programmed by your Vertex Standard Dealer.
FCC ID: AXI11134620
IC: 10239A-11134620