Motorola Solutions Inc. 89FT3818 ユーザーズマニュアル
31
Pr
og
ra
m
m
ing F
ea
tur
es
RDX
2. Press sb1 or sb2 to select the sensitivity level.
3
= High sensitivity, for quiet environments
2
= Medium sensitivity, the default setting
1
= Low sensitivity, for loud environments
3. Press and hold M to exit.
Cloning
You can duplicate RDX Series radio settings from one radio to another by using
Cloning
You can duplicate RDX Series radio settings from one radio to another by using
optional accessories.
There are two methods in which the radios can be cloned:
There are two methods in which the radios can be cloned:
Using the Radio-to-Radio Cloning Cable (RLN6303)
1. Ensure both programmed and non-programmed radios are OFF
2. Connect one side of the USB cable, to the back of the charging tray.
3. Connect the opposite side of the USB cable, to the back of the second charging
1. Ensure both programmed and non-programmed radios are OFF
2. Connect one side of the USB cable, to the back of the charging tray.
3. Connect the opposite side of the USB cable, to the back of the second charging
tray.
4. Place the non-programmed radio into one of the charging trays and turn it ON
5. Place the programmed radio into the second charging tray - keep it OFF
6. Once the radio is positioned properly in the charging tray, press and hold down
4. Place the non-programmed radio into one of the charging trays and turn it ON
5. Place the programmed radio into the second charging tray - keep it OFF
6. Once the radio is positioned properly in the charging tray, press and hold down
the PTT, side button 2, and turn the radio ON.
6864110R04b.book Page 31 Friday, October 20, 2006 4:38 PM