Motorola Solutions Inc. 89FT4929 ユーザーズマニュアル

m

TALKABOUT ® TWO-WAY RADIO

*MN002392A01*

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks 

or registered trademarks of Motorola Trademark Holdings, LLC and are used under 

license. All other trademarks are the property of their respective owners. 

© 2016 and 2018 Motorola Solutions, Inc. All rights reserved. 

Printed in 

Before using this radio, read this booklet which contains 
important operating instructions.
For information on product details, brochures, user manuals and 
approved accessories. Please refer to 
www.motorolasolutions.com.

National and international regulations require manufacturers to 
comply with the RF energy exposure limits for portable two-way 
radios before they can be marketed. Your Motorola Solutions 
two-way radio is designed, manufactured, and tested to comply 
with all applicable national and international regulations for 
human exposure to radio frequency electromagnetic energy.

For more information on what RF energy exposure is, see the 
following websites:

•

https://www.fcc.gov/

•

http://www.who.int/peh-emf/project/en/

For additional information, see https://
www.motorolasolutions.com/en_us/about/ company-overview/
corporate-responsibility/governance-and-policies/
wirelesscommunication-and-health-faqs.html.

For a Class B digital device or peripheral, the instructions 
furnished the user shall include the following or similar 
statement, placed in a prominent location in the text of the 
manual:

Note:This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following 
measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and
receiver.

•

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician
for help.

•

Transmit no more than 50% of the time. To transmit (talk),
press the Push-To-Talk (PTT) button. To receive calls,
release the PTT button.

•

Hold the radio in a vertical position in front of the face with
the microphone (and other parts of the radio including the
antenna) at least 1 in. (2.5 cm) away from the nose or lips.
Antenna should be kept away from the eye.

•

When worn on the body, always place the radio in a
Motorola Solutions-approved clip, holder, holster, case, or
body harness for this product.

•

DO NOT hold the antenna when the radio is transmitting.

•

DO NOT use any portable radio that has a damaged
antenna. If a damaged antenna comes into contact with
your skin, a minor burn can result.

•

To ensure continued compliance with applicable RF
exposure limits, use only Motorola Solutions-approved,
supplied or replacement antennas, batteries, and
accessories.

•

For a list of Motorola Solutions-approved accessories
please refer to your user manual or visit
www.motorolasolutions.com

Exposure to loud noises from any source for extended periods 
of time may temporarily or permanently affect your hearing. The 
louder the volume of the radio, the sooner your hearing will be 
affected. Hearing damage from loud noise is sometimes 
undetectable at first, and can have a cumulative effect.
To protect your hearing, follow these precautions:
•

Use the lowest volume necessary to do your job.

•

Turn up the volume only if you are in noisy surroundings.

•

Turn down the volume before putting on a headset or
headphones.

•

Limit the amount of time you use a headset or
headphones at high volume.

•

When using the radio without a headset or headphones,
do not place the speaker of the radio directly against your
ear.

If you use a personal medical device, such as a pacemaker or 
hearing aid, consult the manufacturer of your device to 
determine if it is adequately shielded from RF energy. Your 
physician may be able to assist you in obtaining this information.

The following explains the operational warnings:
For Vehicle With Air Bags

•

Charge your battery using the approved Motorola
Solutions charger.

•

Use the battery in accordance with its water and/or dust
Ingress Protection (IP) rating.

•

Do not discard your battery into a fire.

•

Do not replace the battery in any area labeled “Hazardous
Atmosphere”.

•

Do not disassemble, crush, puncture, shred, or otherwise
attempt to change the form of your battery. 

•

Do not dry a wet or damp battery with an appliance or heat
source, such as a hair dryer or microwave oven.

•

Do not allow conductive material such as jewelry, keys, or
beaded chains to touch exposed battery terminals.

The Motorola Solutions communications equipment certified as 
intrinsically safe by the approving agency (FM, UL, CSA, 
CENELEC) is tested as a complete system which consists of the 
listed agency approved portable, approved battery, and 
approved accessories or options, or both. This approved 
portable and battery combination must be strictly observed. 
There must be no substitution of items, even if the substitute 
has been previously approved with a different Motorola 
Solutions communications equipment unit. 

Approved 

configurations are listed by the approving agency (FM, UL, 
CSA, CENELEC).
The Intrinsically Safe Approval Label affixed to radio refers to 
the intrinsically safe classification of that radio product, and the 
approved batteries that can be used with that system. The 
manual PN referenced on the Intrinsically Safe Approval Label 
identifies the approved accessories and or options that can be 
used with that portable radio unit. Using a non-Motorola 
Solutions-intrinsically safe battery and/or accessory with the 
Motorola Solutions-approved radio unit will void the intrinsically 
safe approval of that radio unit.

This device complies with part 15 of the FCC Rules and Industry 
Canada’s License-exempt RSS’ per the following conditions:
•

This device may not cause interference.

•

This device must accept any interference received,
including interference that may cause undesired
operation.

•

Changes or modifications made to this device, not
expressly approved by Motorola Solutions, could void the
authority of the user to operate this equipment.

According to FCC Part 95, FRS devices do not require a 
license. Use of Motorola radio in Canada is subject to the rules 
regulations in ISED RSS 210 and do not require a license.

Changes or modifications not expressly approved by Motorola 
Solutions may void the user authority granted by the FCC or 
ISED to operate this radio and should not be made. To comply 
with FCC or ISED requirements, transmitter adjustments should 
be made only by or under the supervision of a person certified 
as technically qualified to perform transmitter maintenance and 
repairs in the private land mobile and fixed services as certified 
by an organization representative of the user of those services. 
Replacement of any transmitter component (crystal, 
semiconductor, etc) not authorized by the FCC or ISED 
equipment authorization for this radio could violate FCC or ISED 
rules.

Note:Use of this radio outside the country where it was intended 

to be distributed is subject to government regulations and 
may be prohibited.

Mexico
Use of GMRS frequencies is subject to the Rules and 
Regulations of the Federal Communications Institute (IFT) 
requires that all operators using GMRS frequencies obtain a 
permit before operating their equipment. To obtain a permit from 
the IFT, the user must proceed in accordance with Articles 14 
and 15 of the Federal Telecommunications Law. Consult your 
local IFT office for more information: www.ift.org.mx

Uruguay
Use of GMRS frequencies is subject to the Rules and 
Regulations of the Regulatory Unit Communications Services 
(URSEC). URSEC requires that all operators using GMRS 
frequencies obtain a permit before operating their equipment. 
The authorization shall depend on the channel availability at the 
time the authorization is requested. To obtain a permit from 
URSEC, consult your local URSEC office for more information: 
www.ursec.gub.uy.

Panama and Paraguay
The Republic of Panama and Paraguay do not require 
authorization to use FRS/GMRS radio equipment frequencies.

Chile
Servicio de Banda Local UHF frequency use is subject to 
SUBTEL Resolution 1.261 and Resolution 52 Exenta. A license 
is required for use in Chile. To obtain a Banda Local end-user 
license:

1. Fill out the required application form to request Local Band 
service.
a. It is available on the SUBTEL website: 
http://www.subtel.gob.cl/ index.php?option=com_ content&view 
=article&id=1388&Itemid=2087
b. It is also available at the SUBTEL offices:
Subsecretaría de Telecomunicaciones
Unidad de Licencias y Permisos
Lorenzo Gotuzzo N°124, piso 6
Santiago, Chile
Tel. (56-2) 421 3634
2. Present this form with your ID at the above location.
3. Consult the SUBTEL offices for applicable fees.
For more information, consult SUBTEL at www.subtel.cl or call 
their offices at the telephone number listed above.

Colombia 
Operacion itinerante de baja potencia frequency use is subject 
to CRC Resolución 002190 de 2003. No license is required for
use in Colombia. Consult CRC at www.crcom.gov.co for more 
information.

Peru
Colectivo Familiar frequency use is subject to MTC RVM
388-200-MTC/15.03 and FCC (FRS), Part 95B. No license is
required for use in Peru. Consult MTC Peru at www.mtc.gob.pe
for more information.

Argentina
Uso Familiar frequency use is subject to CNC Resolution SC
No. 2750/98. No license is required for use in Argentina.

Consult the AFTIC at http://www.aftic.gob.ar/ for more 
information

.

Brazil

The frequency general use is subject to the Annex to Resolution 
506 Section XIV - Radio Communication Equipment General 
Purpose. It is not required use license in Brazil. See the 
ANATEL site for more information: http://www.anatel.gov.br/
Portal/exibirPortalInternet.do

Each radio can use either 1 NiMH rechargeable battery pack or 
3 AA alkaline batteries and beeps when the batteries are low.

1.

Take the belt clip off.

2.

With the back of the radio facing you, lift the battery cover
latch up and remove the cover.

3.

Insert the NiMH battery pack by following the instruction
on the battery pack. (The ribbon must be underneath the
battery pack and must wrap around the right side of the
pack for easy removal).

4.

Close the battery cover firmly.

1.

Take the belt clip off.

2.

With the back of the radio facing you, lift the battery cover
latch up and remove the cover.

3.

Insert the three AA Alkaline batteries with + and – polarity
as shown inside. (The ribbon must be underneath the AA
alkaline batteries and must wrap around the right side of
the batteries).

4.

Close the battery cover firmly.

The radio battery icon shows the battery charge level, from full 

 to empty 

. When the radio has one segment left, 

the radio chirps periodically or after releasing the PTT button 
(Low Battery Alert).

1.

Turn the radio off.

2.

With the back of the radio facing you, lift the battery cover
latch up and remove the cover.

3.

Remove the NiMH battery pack by pulling the ribbon
attached to the radio.

4.

Close the battery cover firmly.

1.

Turn the radio off.

2.

With the back of the radio facing you, lift the battery cover
latch up and remove the cover.

3.

Gently remove each alkaline battery by pulling the ribbon
attached to the radio.

4.

Close the battery cover firmly.

•

Exercise care when removing NiMH or AA batteries. Do
not use sharp or conductive tools to remove either of
these batteries.

•

Remove the batteries before storing your radio for
extended periods of time. Batteries corrode over time and
may cause permanent damage to your radio.

1.

Charge the NiMH batteries once every 3 months when not
in use.

2.

Before placing the radio in storage, remove the battery.

3.

Store the NiMH batteries in temperature between -20 °C to
35 °C and in low humidity. Avoid damp conditions and
corrosive materials.

The micro-USB charger is a handy port that allows you to 
conveniently charge your NiMH battery pack. 
1.

Make sure your radio is turned OFF.

2.

Plug the micro-USB cable into the micro-USB charging
port on your radio. Connect the other end of the micro-
USB charger to wall power outlet.

3.

An empty battery will be fully charged in 12 hours.

4.

The battery meter on LCD will move to indicate the battery
is charging.

Note:
•

When moving between hot and cold temperatures, do not
charge the NiMH battery pack until the battery
temperature acclimates (usually about 20 minutes).

•

For optimal battery life, remove the radio from the charger
within 16 hours. Do not store the radio while connected to
the charger.

1.

Attach the belt clip to the back of the radio until the clip
clicks in place.

2.

Attach the belt clip to pocket or belt strap until the clip
clicks in place.

1.

Push the release tab on top of the belt clip to release the
latch.

2.

Pull the belt clip away from the back of the radio.

1.

Press and hold on the 

 button to turn your radio ON/

OFF. In the ON position, the radio chirps and briefly shows
all feature icons available on the radio.

2.

The display screen then shows the current channel, code
and all features that are enabled. The radio is in 
Two-Way mode.

Press and hold 

 for three seconds to listen to volume level.

1.

First press either 

 or 

 to trigger volume change. You

will see current volume level on screen. 

2.

Press 

 to increase the volume. Press 

 to decrease

the volume.

3.

When the volume reached level 0 the mute icon
appears permanently on screen.

Do not hold the radio close to your ear. If the volume is set to an 
uncomfortable level, it could hurt your ear.

To communicate, all radios in your group must be set to the 
same channel and Interference Eliminator Code.
1.

To talk, press and hold the PTT button. When transmitting,

 icon blinks (only on radio with weather

mode feature) and 

 is shown.

2.

When you are finished talking, release the PTT button.

3.

When receiving,

 icon blinks (only on radio

with weather mode feature) and 

 is shown.

For maximum clarity, hold the radio one inch away from your 
mouth and speak directly into the microphone. Do not cover the 
microphone while talking.

Your radio is designed to maximize performance and improve 
transmission range. Do not use the radios closer than five feet 
apart.

Pressing and holding 

 for three seconds allows you to listen 

to the volume level of the radio when you are not receiving. You 
can also press 

 to check for activity on the current channel 

before you talk.

To prevent accidental transmissions and save battery life, the 
radio emits a continuous warning tone and stops transmitting if 
you press the PTT button for 60 continuous seconds.

By pressing “mode” button, the user will be seamlessly 
switching between two-way and weather mode. When radio is in 
two-way mode, 

 will be shown. When radio is in 

weather mode, 

 will be shown. Corresponding 

setting and information will be shown on the LCD.

Each country model has different number of channels and 
frequencies. See the “Channels and Frequencies” table on 
overleaf for details.

1.

With the radio on, press

 one time until the channel

number starts to flash. 

2.

Press

 or 

 and select an unused or quiet channel.

An extended press of 

 or 

 allows you to scroll

through the channels rapidly.

3.

Press the PTT button to save the channel setting and exit 

menu or 

 to continue set up.

•

Refer to vehicle manufacturer's manual
prior to installation of electronic equipment
to avoid interference with air bag wiring.

•

DO NOT place a portable radio in the area
over an air bag or in the air bag deployment
area. Air bags inflate with great force. If a
portable radio is placed in the air bag
deployment area and the air bag inflates,
the radio may be propelled with great force
and cause serious injury to occupants of the
vehicle.

•

Use of a radio that is not intrinsically safe in 
a potentially explosive atmosphere could 
result in a serious injury, or death. You 
should only use a certified Intrinsically Safe 
radio in potentially explosive atmospheres.

•

Explosive atmospheres refer to hazard 
classified locations that may contain 
hazardous gas, vapors, dusts, such as 
fueling areas below decks on boats, fuel, or
chemical transferor storage facilities, and 
areas where the air contains chemicals or 
particles such as grain, dust, or metal 
powders. Areas with potentially explosive 
atmospheres are often, but not always, 
posted.

•

Turn off your radio prior to entering any area
with a potentially explosive atmosphere
unless it is a radio type specifically certified 
for use in hazardous location areas.

•

DO NOT remove, install, or charge batteries 
in such areas, or remove or install
antennas. Sparks in a potentially explosive 
atmosphere can cause an explosion or fire 
resulting in bodily injury or even death.

Warning: To avoid possible interference with 

blasting operations, turn off your radio when you 

are near electrical blasting caps, in a blasting 

area, or in areas posted: “Turn off two-way radio.” 

Obey all signs and instructions.

Repairs to a Motorola Solutions intrinsically safe 
radio product certified by, for example, FM, UL, 
CSA, CENELEC, should only be done at a 
location that has been audited under the certifying 
body's repair and service standard.

Contact Motorola Solutions for assistance 
regarding repairs and service of Motorola 
Solutions intrinsically safe equipment.

A repair constitutes something done internally to 
the unit that would bring it back to its original 
condition. Items not considered as repairs are 
those in which an action is performed on a unit 
which does not require the outer casing of the unit 
to be opened in a manner that exposes the 
internal electrical circuits of the unit.

The European Union's WEEE directive requires 
that products sold into EU countries must have 
the crossed out trash bin label on the product (or 
the package in some cases). As defined by the 
WEEE directive, this cross-out trash bin label 
means that customers and end-users in EU 
countries should not dispose of electronic and 
electrical equipment or accessories in household 
waste. Customers or end-users in EU countries 
should contact their local equipment supplier 
representative or service centre for information 
about the waste collection system in their country.

Push-to-Talk

Power On/Off/
Mode Switch

Call Tone

Screen

Scan/Monitor

Menu/Lock

Accessory Port

Speaker
Micro-USB 
Charging Port

Microphone

Numbers for Channel

Numbers for Codes,
Call Tone

Battery Meter

Weather Alert

Lock

Roger Tone

Call Tone

Keypad Tone

Mute

Status (transmit/
receive)
Scan

iVOX / VOX

MN002392A01_.fm  Page 1  Thursday, March 15, 2018  10:59 AM