Motorola Solutions Inc. 89FT5803 ユーザーズマニュアル
30
English
GETTING STAR
TED
Note:
In the United States, FCC regulations
require you to monitor the conven-
tional channels before sending a call.
The monitor feature can be accessed
through one of your programmable
buttons.
require you to monitor the conven-
tional channels before sending a call.
The monitor feature can be accessed
through one of your programmable
buttons.
•
If the mode-busy feature is enabled, a
blinking red LED on receive (PTT button
released) indicates that the mode is cur-
rently busy.
blinking red LED on receive (PTT button
released) indicates that the mode is cur-
rently busy.
•
If a mode is programmed for receive only,
any attempt to transmit on that mode will
cause an invalid-mode tone to sound until
the PTT button is released.
any attempt to transmit on that mode will
cause an invalid-mode tone to sound until
the PTT button is released.
RECEIVING A TRUNKED OR
CONVENTIONAL CALL
CONVENTIONAL CALL
FAILSOFT OPERATION (TRUNKED
SYSTEMS ONLY)
SYSTEMS ONLY)
This feature is programmed by your authorized
Motorola dealer.
Motorola dealer.
The “failsoft” system ensures continual radio
communications capability during a trunked
system failure. Your radio will automatically go
into failsoft operation, if the central trunking
controller fails for any reason. While in failsoft
operation, your radio will transmit and receive
on a predetermined frequency on a
conventional mode. When the trunked system
returns to normal operation, the radio will
automatically leave the failsoft operation and
return to trunked operation.
communications capability during a trunked
system failure. Your radio will automatically go
into failsoft operation, if the central trunking
controller fails for any reason. While in failsoft
operation, your radio will transmit and receive
on a predetermined frequency on a
conventional mode. When the trunked system
returns to normal operation, the radio will
automatically leave the failsoft operation and
return to trunked operation.
During failsoft operation,
1
Turn your radio on.
2
Adjust your radio’s volume.
3
Use the Mode Selector knob to select the
desired trunked talkgroup or conventional
channel.
desired trunked talkgroup or conventional
channel.
•
Make sure the PTT button is released.
4
Listen for voice activity. The LED indicator
flashes green when your radio is receiving.
flashes green when your radio is receiving.
1
You will hear a faint “beeping” sound every
ten seconds.
ten seconds.
2
Your radio becomes unsquelched.