Motorola Solutions Inc. 92FT4896 ユーザーズマニュアル

The Emergency feature is used to indicate a critical situation.

If the Top (Orange) button is preprogrammed to send an 
emergency signal, this signal overrides any other 
communication over the selected channel.

Your radio supports the following Emergency modes:

Emergency Alarm

Emergency Call (Trunking Only)

Emergency Alarm with Emergency Call

Silent Emergency Alarm

Check with your dealer or system administrator for more 
information on the programming of this feature.

Only one of the Emergency modes above can be assigned to 
the preprogrammed Emergency button.

To exit emergency at any time, press and hold the 
preprogrammed Emergency button for about a 
second.

This feature allows you to send a data transmission, which 
identifies the radio sending the emergency, to the dispatcher.

Press the preprogrammed Emergency button.

The display shows 

Emergency and the current zone or 

channel. A short, medium-pitched tone sounds and the 
LED rapidly blinks red.
OR
The display shows 

No emergency, if the selected channel 

does not support emergency.

When you receive the dispatcher’s acknowledgment, the 
display shows 

Ack received. Four tones sound, the alarm 

ends, and the radio exits the Emergency Alarm mode.
OR
If no acknowledgement is received, the display shows 
No acknowledge. The alarm ends and the radio exits the 
Emergency Alarm mode.

O9Head_68007024014_b.book  Page 58  Wednesday, October 20, 2010  2:28 PM