Motorola Solutions Inc. 92FT5854 ユーザーズマニュアル
44
• Circuit Lifetime – displays the total minutes of all of
your circuit data use.
• Kbytes Reset – keeps a running total of the number
of Kilobytes sent and received by your phone, until you
reset it.
To view or reset a timer:
1 From the main menu, select Call Timers.
2 Select the feature you want to view or reset.
3 To view a feature without resetting: Press
1 From the main menu, select Call Timers.
2 Select the feature you want to view or reset.
3 To view a feature without resetting: Press
o
when you
are finished viewing. -or-
To reset a feature: Press
A
under Reset. Press
o
or
press
A
under Yes to confirm.
Note: The values displayed by Call Timers should not
be used for billing. Call timers are estimates
only.
Using Your Phone as a Modem
Note: This feature may not be offered by your service
provider.
To use your phone as a modem with a laptop, handheld
device, or desktop computer:
1 Connect the Mini-USB connector of the data cable to
the Mini-USB port at the right side of the phone.
2 Insert the USB data plug into the data port of the other
device.
When used as a modem, your phone has these data
transfer modes:
• Circuit data – used for sending and receiving faxes and
• Circuit data – used for sending and receiving faxes and
for transferring large files
• Packet data – used for small file transfers such as email
To use these services, you must install the iDEN Wireless
To use these services, you must install the iDEN Wireless
Data Services software (available separately). For more
information on setting up your computer and your M710
phone for packet and circuit data calls, refer to the Wireless
Data Services User’s Guide or contact your service provider.