Motorola Solutions Inc. 92FT6007 ユーザーズマニュアル
O7 BT Board Assemblyy
1. Place the Bluetooth PCB and Bluetooth PCB
retainer in the front housing, seating the PCB
retainer in the front housing, seating the PCB
retainer in the front housing, seating the PCB
surface on the screw bosses. Ensure that the
aligning bosses protrude through the PCB and
retainer.
surface on the screw bosses. Ensure that the
aligning bosses protrude through the PCB and
retainer.
2.Using a Torx T10 screwdriver, fasten the four
Bluetooth PCB retention screws following the
sequence . (torque to 6 in. lbs.).
Bluetooth PCB retention screws following the
sequence . (torque to 6 in. lbs.).
q
(
q
)